GE CARESCAPE, User Manual

Page: 381 / 548

EEG and auditory evoked potentials
2. Select EEG tab > View .
3. Select Numerical .
Checking EEG electrodes
Press the Imp. Check key on the module or headbox, or:
1. Select the EEG parameter window.
2. Select EEG tab > View .
3. Select Check Electrodes .
Defining an EEG montage
You can define your own montage by plugging the leadwires directly into the headbox
or by building your own leadset.
NOTE
Since the monitor sets lead positions automatically according
to the identification pin, make sure that you use preconfigured
lead positions. If you change them, always update the
montage settings.
1. Select the EEG parameter window.
2. Select EEG tab > Montage .
3. Select a montage ( Montage 4 to Montage 8 ) from the Select Montage list.
4. Go through the different menu items and select the options to suit the application.
For instance, to rename the selected montage: select
Name Montage , remove
the previous name, type the new name in the Name field, and then select Enter .
The name can contain nine characters at the most.
5. You can save the montage for later use by selecting Save Montage > Yes .
Your own montages will not be automatically identified by the monitor. You must
select them from the menu when starting the measurement.
NOTE If you select Factory , all settings, including the name, will
return to factory defaults.
Printing EEG
You can print the currently displayed EEG view.
1. Select the EEG parameter window.
2. Select EEG tab > View .
3. Select Numerical or CSA .
4. Select Print Page .
Stopping the EEG measurement
1. Disconnect the electrodes.
2062971-001 CARESCAPE Modular Monitors 381