GE CARESCAPE Monitor B850 Service Manual Download Page 136

Page: 136 / 192

CARESCAPE Monitor B850

128

2106778-001

Verify that the recorder starts printing. Let the recorder print for approximately 10
seconds and verify the following things from the printout:



The header line contains the date, time and some other applicable status and
configuration information.



The grid is clear.



The waveforms labels appear in the printout as configured.

Select one of the following options to stop printing:



Select

Stop Printing

from the main screen.



Select

Monitor Setup > Printing > Waveforms > Stop Printing

10.3.13 Test completion

Select

Discharge Patient

Reset Case

to discard any changes made to the patient monitor

configuration during checkout.

•

Complete the Appendix

B. Maintenance check form

Summary of Contents for CARESCAPE Monitor B850

































































































































































































Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands

GE CARESCAPE Monitor B850, Service Manual

Search results

Summary of Contents for CARESCAPE Monitor B850

Reviews:

Related manuals for CARESCAPE Monitor B850

Brands by name

Popular brands