GE Cafe CSCP5UGXSS, Owner'S Manual & Installation Instructions

Page: 4 / 120

About the temperature controls.
4
The temperature controls are preset in the factory at
37°F
for the refrigerator compartment and
0°F
for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the
SET
temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may vary slightly from the
SET
temperature based on
usage and operating environment.
On some models, setting both controls to the warmest setting until the display flashes (off) will stop
cooling in both the freezer and refrigerator compartments.
On other models, setting either control to the warmest setting until the display flashes (off) will stop
the cooling to the freezer and refrigerator.
NOTE:
Turning the refrigerator off via the controls on the touch panel does not shut off electrical
power to the refrigerator.
NOTE:
The refrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
Not all features are on all models. Your controls may be similar to the following
:
The Performance Air-Flow System is
designed to maximize temperature control
in the refrigerator and freezer compartments. This
unique special feature consists of the Air Tower
along the back wall of the refrigerator and the Air
Tunnel on the bottom portion
of the freezer rear wall. Placing food in front
of the louvers on these components will not affect
performance. Although the Air Tower
and the Air Tunnel can be removed, doing
so will affect temperature performance.
(For removal instructions, on-line, 24 hours a day,
contact us at GEAppliances.com or call
800.GE.CARES. In Canada, contact us at
geappliances.ca or call 1.800.561.3344.)
Performance Air Flow System
OR