GE BAKER HUGHES Masoneilan SVi 1000, Quick Start Manual

Page: 28 / 88

© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
28 | = BHGE
3. Select mounting hole for the stroke of the valve. Unless otherwise specified, the
SVi1000 mounting assumes that the actuator is in the normal upright position.
The mounting hole in the slotted opening of the mounting bracket must be left
when facing the actuator, with the actuator in the upright position.
Table 3: Reciprocating Valve Mounting Hole and Turnbuckle Length
Actuator Size
Masoneilan
87/88
Stroke Mounting
Hole
Lever
Hole
Turnbuckle
Length
6 and 10 0.5 - 0.8"
(12.7 - 20.32 mm) A A 1.25"
(31.75 mm)
10 0.5 - 0.8"
(12.7 - 20.32 mm) A A 1.25"
(31.75 mm)
10 >0.8 – 1.5"
(20.32 - 41.5 mm) B B 1.25"
(31.75 mm)
16 0.5 - 0.8"
(12.7 - 20.32 mm) B A 2.90"
(73.66 mm)
16 >0.8 – 1.5"
(20.32 - 41.5 mm) C B 2.90"
(73.66 mm)
16 >1.5 – 2.5"
(41.5 - 63.5 mm) D C 2.90"
(73.66 mm)
23 0.5 - 0.8"
(12.7 - 20.32 mm) B A 5.25"
(133.35 mm)
23 >0.8 – 1.5"
(20.32 - 41.5 mm) C B 5.25"
(133.35 mm)
23 >1.5 – 2.5"
(41.5 - 63.5 mm) D C 5.25"
(133.35 mm)