Dimensions and Installation Information (in inches)
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
* ADA qualified based
on Uniform Federal
Accessibility Standards
*
For answers to your Monogram
®
or GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
ABS45DF
GE Artistry
™
Series 30" Free-Standing Electric Range
Specification Created 5/13
321579
KW Rating
240V
11.0
208V 8.3
Breaker Size
240
33.3 Amps
†
208
31.9 Amps
†
†
Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical
Code requires that new construction (not existing)
utilize a 4-conductor connection to an electric
range.
Receptacle Locations: Locally approved flexible
service cord or conduit must be used because
terminals are not accessible after range
installation. See shaded area in drawing for
location of electrical outlet box. Recommended
outlet locations allow range to be installed directly
against wall.
Note: 30" ranges conform to U.L. requirements for
0" spacing from adjacent walls below countertops.
To reduce possibility of scorching walls, engineering
recommends a minimum of 1-1/2" spacing to allow
for possible extended, high-heat, no-load heating
element operation.
Installation information: Before installing, consult
installation instructions packed with product for
current dimensional data.
CENTER LINE
REAR
WALL
44-1/2
46-3/4
29
8-1/2
w/handle
26-1/4
w/o handle
30
2-1/4
7-1/2
7
7-1/2
2-1/4
3-1/2
5
36
to
36-1/2
30" Free-Standing Electric Single Oven Range
ABS45DF
CENTER LINE
REAR
WALL
44-1/2
46-3/4
29
8-1/2
w/handle
26-1/4
w/o handle
30
2-1/4
7-1/2
7
7-1/2
2-1/4
3-1/2
5
36
to
36-1/2
30" Free-Standing Electric Single Oven Range
ABS45DF
