GE ArcamEBM Spectra H, Operation Manual

Page: 85 / 142

7
Software
Overview
7 7..1 1..2 2..6 6 B Bu uiilld d P Prre ep pa arra attiio on n
Prepare the build by specifying Powder Batch and loading the build project. Here is
where you can start the automated build process.
N No otte e
If any warnings are lit, indicating a problem, this has to be addressed before a build can be
started.
If a Build Project is loaded from an external system, for example Materialise Streamics, the L Lo oa ad d Build
Project function can be disabled in the Production Mode Settings (Machine Setup in Engineering Mode).
If a reason exists not to start the automated build process directly, there is an option to start only the vac-
uum pumps by pressing S
Stta arrtt Vacuum. This function can be disabled in the Production Mode Settings (Ma-
chine Setup in Engineering Mode).
02 OM-710430 en-GB 81