GE ArcamEBM Spectra H, Operation Manual

Page: 76 / 142

7
Software
Overview
7 7..1 1..2 2..3 3 P Prro od du uccttiio on n M Mo od de e A Alla arrm m T Tyyp pe ess
The symbols used in Engineering Mode and Production Mode differs.
The Alarm button changes appearance depending on the most se-
vere alarm present.
When the Alarm button is pressed a list of unacknowledged alarms
appears at the top section of the screen, and a list of acknowledged
alarms are shown at the bottom section. Depending on alarm type,
some alarms are just information and some require an action from the
operator to be able to run the machine.
The number on top of the alarm symbol shows how many alarms that are active. In this
case four alarms are active.
This alarm symbol has two categories:
E Errrro orr
Requires an action from the operator.
F Fa atta all Requires a reboot of the computer.
This alarm has two categories:
W Wa arrn niin ng g Might require an action from the operator.
R Re ecco ovve erra ab blle e E Errrro orr This alarm will automatically be solved by EBM Control.
No alarms activated.
Pressing the alarm button opens the alarm page, presenting all cur-
rent alarms at the top section of the screen, and a list of acknowl-
edged alarms are shown at the bottom section.
72 02 OM-710430 en-GB