GE ArcamEBM Spectra H, Operation Manual

Page: 117 / 142

7
Software
Overview
7 7..1 1..3 3..6 6 P Prro occe essss S Se ettttiin ng gss
These settings are only to be defined when loading a single build file (xxx.abf) instead of a complete build
project (xxx.abp).
1. Press M Me en nu u.
2. Press P Prro occe essss.
3. Select the material to be used, by pressing S Se elle ecctt
T Th he em me e.
4. Click a checkbox in the “Configure Process Steps”
panel.
5. Press S Se elle ecctt T Th he em me e to access a list of themes to
choose from (such as preheat, melt, net, and wafer).
N No otte e
The order the process steps gets in the “Step” area is the same as the build order. Recom-
mended build sequence is: Preheating (without model), Melt, Net (if required) and Wafer (sup-
port, if required).
6. Select one of the themes displayed:
• Preheat
• Melt
• Net
• Wafer
• PointNet
7. Press S Se elle ecctt m mo od de ellss to choose model(s) to be built
in the actual process step.
Every process step can have multiple models as-
signed to it.
02 OM-710430 en-GB 113