GE ArcamEBM Spectra H, Operation Manual, Page: 109 / 142

7
Software
Overview
3. Press (S Sa avve e to replace current project or) S Sa avve e a ass to
create a new project.
Save
Save as
4. Enter a name for the project.
N No otte e
To prevent build failures due to the build file or build project name, the recommendation is to only
use the letters A to Z (a to z) and numbers 0 to 9. The only special characters recommended to
be used are: plus (+), minus (-) and hash (#). Applies to both Windows XP and Windows 7
installations.
N No otte e
The maximum number of characters to be used is 244, including the path and file suffix, other-
wise the build may fail. Applies to both Windows XP and Windows 7 installations.
5. Press O OK K.
6. The file is stored in
C:\Programfiles\ArcamAB\EBMControl5\BuildProjects.
7.1.3.3.1.2 Import A Build Project
To be able to select a build project it has to be imported to EBM Control.
Build projects are stored in: C C::\\P Prro og grra am mssF Fiille ess\\A Arrcca am mA AB B\\E EB BM MC Co on nttrro oll5 5\\B Bu uiilld dP Prro ojje eccttss.
1. Press M Me en nu u.
2. Press the B Bu uiilld d tab.
3. Press P Prro ojje ecctt.
4. Press IIm mp po orrtt.
5. Browse for the build project file.
6. Click O Op pe en n.
02 OM-710430 en-GB 105