GE ArcamEBM Spectra H, Operation Manual, Page: 106 / 142

7
Software
Overview
7 7..1 1..3 3..2 2..1 1 A Accttiivva atte e T Tiim me e G Grra ap ph h D Diissp plla ayy
Show Point Values – must be selected to visualize the exact point values when the mouse is positioned on
the graph.
Set scale -
shows the values from restart of EBM control to present time. Must be clicked every time the
user wants the graph to be updated.
1. Press O Ovve errvviie ew w.
2. Press G Grra ap ph h.
3. Click the checkbox in front of each parameter to be
shown in the time graph display.
4. Selected parameters are shown in the “Selected
Items” window below.
5. The order the parameters are shown, depends on
the order they were selected. Press arrow up or
down to switch position.
6. To remove a parameter from the time graph display,
press the trash can.
102 02 OM-710430 en-GB