GE ArcamEBM Spectra H, Installation Manual

Page: 80 / 85

7
Installation
7 7..6 6..6 6 C Ch he ecckk T Th he e IIn ntte errn na all M Me ed diia a S Sh hu un ntt V Va allvve e & & T Te em mp pe erra attu urre e
Verify that the shunt valve is working and operating as it should.
1. Press M Me en nu u.
2. Press S Se errvviicce e P Pa ag ge e.
3. Press H Ha arrd dw wa arre e S Stta attu uss.
4. Close the cooling media inlet (2).
5. Check that the shunt valve moves visually on the
Cooling System.
6. Check the indicator for S Sh hu un nttV Va allvve eW Wa atte errM Miixx in EBM
Control.
1 10 00 0% % = Full by-pass
0 0% % = No by-pass
7. Watch over time (about 15 min) when the internal
temperature rises, the shunt value should then
change.
8. When the external cooling media valves are opened
again, the shunt valve should adjust back.
9. The temperature should then stabilise at about
2 25 5 °°C C.
10. Fill in the value in the IIn nsstta alllla attiio on n C Ch he ecckklliisstt (IC).
76 01 IM-710429 en-GB