GE ArcamEBM Spectra H, Installation Manual

Page: 49 / 85

7
Installation
7 7..2 2..3 3 U Un nccrra atte e T Th he e C Ca ab biin ne ettss
C Ca au uttiio on n
The chamber cabinet has an uneven centre of gravity. Lift only from the front (viewport side) or
the right side (opposite of the cooling system).
1. Check the crate for visual damage. In case of dam-
age, note this on the IIn nsstta alllla attiio on n C Ch he ecckklliisstt ((IIC C)).
2. Open the locking tabs using a carpenter hammer
and a crow bar.
3. Lift off the roof piece.
4. Remove 8 8 screws holding the side pieces to the
transportation beams.
5. Carefully remove the side walls.
6. Remove the straps holding the cabinet to the pallet.
7. Remove the bubble plastic wrap from around the
cabinets.
8. Using a forklift, lift the cabinets approximately 1 15 50 0
m mm m ((6 6””)) to allow clearance for the cabinet feet, and
then screw down the cabinet feet so that they carry
the cabinets.
9. Remove the beams underneath the machine together
with the bottom board.
10. Check the cabinets for visual damage. In case of
scratches, dents or other sign of damage, note this on
the IIn
nsstta alllla attiio on n C Ch he ecckklliisstt ((IIC C)) and take photos of the
damages.
01 IM-710429 en-GB 45