Instructions for disposal
Follow the instructions below for disposal of the Amersham Imager 680:
Action
Step
Separate all electronic components (terminal strips, power supplies, trans-
mitters, pumps, probes / sensors, etc.) from the system cabinet.
1
Decontaminate the Amersham Imager 680 Cabinet and system cabinet
following appropriate procedures depending on what type of environment
the unit was located in. Follow local and/or national/federal requirements
for disposal of the Amersham Imager 680 Cabinet and the system cabinet.
2
Dispose of electronic components as specified by local regulations depending
on material used in the construction of the components. Follow local and/or
national/federal requirements for disposal of the electronic components.
3
36
Amersham Imager 680 Operating Instructions 29271308 AB
2 Safety instructions
2.4 Recycling information
