background image

UseandCare& Installation Guide

Air Conditioner

GE Appliances

Models: AMH06

AMH08

Safety Instructions

........................ 2

Operating Instructions

Air Direction .................................................... 4
Control Settings......................................... 3, 4

Care and Cleaning

Air Filter............................................................ 5
Grille and Cabinet .......................................... 5
Outdoor Coils.................................................. 5

Problem Solver

...............................13

Things that are normal ...............................13
More questions ?…call

GE Answer Center® 800.626.2000

Installation

Electrical Requirements............................... 6
Extension Cords ............................................. 6
Grounding........................................................ 6
Installation Instructions ........................ 6–12

Window Installation ........................... 7–9
Through-the-Wall Installation ......10–12

Consumer Services

...................15

Appliance Registration................................. 2
Important Phone Numbers........................15
Model and Serial Number Location .......... 2
Warranty ....................................... Back Cover

This unit is designed for use in a standard 
double-hung window. It can also be installed 
in a standard sliding window using kit 

RAK808

(optional slider window installation kit).

Summary of Contents for AMD10

















Reviews: