Action
Step
From the Column list, select the column type that will be used. The list is
limited to columns relevant for the technique selected in the previous step.
If All was selected, the list will include all columns available, regardless of
technique.
2
Prepare a column of the selected type and place it on the column trolley.
Position the column so that the column's inlet tubing, marked Bottom Inlet,
is facing the handle of the column trolley. Roll the trolley into position between
the system cabinet leg supports, and lock the trolley wheels.
Note:
Be careful when transporting smaller columns (e.g., 2.5 l) on the trolley. Small
columns are light and have a narrow base, and may therefore be unstable.
3
Click Next in the column installation wizard. This will open a checklist of ac-
tions for connecting the column.
4
Edit column parameters in
UNICORN 7
Create a column type in UNICORN 7
Before you edit the column parameters you must create the column type. See UNICORN
Method Manual for instructions.
130
ÄKTA ready Operating Instructions 28960345 AD
9 Column installation
9.2 Installing a column
