Module front panel with rails
A module front panel with rails is available for attaching ÄKTA accessory holders to the
instrument front, for holding accessories such as Superloop™ 150 SNAP. The front panel
with rails occupies one module position.
Luer-SNAP 3.2 connectors
Some maintenance procedures require injection of liquid into a module from a syringe.
Follow the instructions below to construct a secure connection from a Luer syringe to
a module inlet.
It is important that the connection is secure, to avoid leakage of potentially
hazardous liquids injected from the syringe.
Note:
Action
Step
Prepare a length (5 to 10 cm) of 3.2 mm i.d. tubing with SNAP connectors at
each end. The length of the tubing should be sufficient to allow access to
the module inlet without interference from other modules on the instrument.
1
ÄKTA pilot 600 User Manual 29274559 AA
25
2 System description
2.3 Accessories
Summary of Contents for AKTA pilot 600
Page 1: ...KTA pilot 600 User Manual...
