GE Advisor MASTER ATS111 series Manager Manual Download Page 24

Page: 24 / 75

ATS Control Panel
Manager's manual

Listing past alarm events

This list provides you with a quick alarm history. It is a fast and easy way to review where alarms have
happened. This information is useful when you have had to reset an alarm without initially checking its cause.

To list past alarm events

1. Before commencing, the display must show:

14:10 11/01/2005

Code:

2. Press

[ENTER]

twice.

You do not need to enter your PIN code.

The display shows the following details of each alarm (the most recent alarm is shown first):

•

The time the alarm occurred as hour and minutes - HH:MM.

•

The date the alarm occurred as day and month - DD:MM.

•

The type and location of the alarm.

Example:

*13:23 31/10 LOCAL ALARM Zone 1 Fire D> 1-

1-Scan, 0-Exit

3. From the history display you can now:

Option Action

Result

Scroll backwards

Press

[ENTER]

Scroll backwards through the alarm history one by one.

Scroll forwards

Press

[NEXT]

Scroll forwards through the alarm history one by one.

Exit Press

Exits and returns to the original display.

View the complete event description Press

View the complete details for this event.

See also:

Menu option 5, History, page

To Search And Play via quick history and user history see page

Summary of Contents for Advisor MASTER ATS111 series












































































Search results

Summary of Contents for Advisor MASTER ATS111 series

Reviews:

Related manuals for Advisor MASTER ATS111 series

Brands by name

Popular brands

GE Advisor MASTER ATS111 series, Manager Manual

Search results

Summary of Contents for Advisor MASTER ATS111 series

Reviews:

Related manuals for Advisor MASTER ATS111 series

Brands by name

Popular brands