18
Advent Commercial Fire System
Partition/Arming Settings
Account Number 1
Account Number 2
1: xx116, 2: xx117
(Partitions-General Partition)
(Defaults = 00000000) Enter an 8 digit account number. Each
partition/area may have two account numbers. Account number 1
will use the primary phone number to report partition/area events,
while account number 2 will use the secondary phone number to
report partition/area events.
Account Number Format:
for 0 enter 00
for 1 enter 01
for 2 enter 02
for 3 enter 03
for 4 enter 04
for 5 enter 05
for 6 enter 06
for 7 enter 07
for 8 enter 08
for 9 enter 09
for A enter 10
for B enter 11
for C enter 12
for D enter 13
for E enter 14
for F enter 15
To enter an Account Number:
1.
Once the desired item number has been entered the cur-
rent account number will be displayed.
2.
Enter the new account number using the list above. For
example, if you wanted the account number to be
“123456AB,” at the keypad you would enter “01, 02, 03,
04, 05, 06, 10, 11.”
3.
Press
ƒ
and the touchpad displays the new account num-
ber.
Note
Account numbers must equal 8 characters. If you enter
less than 8 characters the panel will automatically replace
the blank spaces with leading zeros (0).
Partition/Area Text
49004
(Partitions-General Partition Settings)
(Default = none) Use the following guidelines to assign each
partition/area a name.
Use the item numbers that appear in Table B.2 on page
page 92 for characters and words listed there.
If a desired word does not appear in Table B.2, create it
using the characters (custom text).
When using words from Table B.2, spaces between them
appear automatically. When using characters from Table
B.2 to create words, you must reserve an item number for
a ‘space’ after the word.
Each character or word uses up one item number. For
example, a word from the list counts as one item number.
A created word (such as BOY’S) counts as six item num-
bers—4 letters, 1 apostrophe, and 1 space.
Only 8 item numbers are allowed for each partition/area
name, so plan ahead before programming partition/area
text. You may need to abbreviate words to avoid running
out of item numbers.
To program Partition/Area Text:
1.
Once in program mode enter
49004
.
The display
shows
ENTER PARTITION NUMBER OR PRESS * TO
CANCEL
.
2.
Enter the desired partition number and press
ƒ
. The dis-
play shows
TEXT FOR PARTITION n IS current text
.
ENTER TEXT NUMBERS OR PRESS # TO ACCEPT
.
3.
Enter the numbers of the desired characters or words. If
you make a mistake press
‚
to start over.
4.
Once all numbers have been entered, press
ƒ
to accept.
The display shows the new partition/area text.
To delete Partition/Area Text:
1.
Once in program mode enter
49004
.
The display
shows
ENTER PARTITION NUMBER OR PRESS * TO
CANCEL
.
2.
Enter the desired partition/area number and press
ƒ
. The
display shows
TEXT FOR PARTITION n IS current text
.
ENTER TEXT NUMBERS OR PRESS # TO ACCEPT
.
3.
Enter
000
and press
ƒ
. The display shows
TEXT FOR
PARTITION n IS NO TEXT
.
Exterior Siren Delay
xx113
(Partitions-Arming)
(Default = foothills setting allows you to set the delay (in
seconds) before an exterior siren sounds during and alarm. This
includes all high level alarms, except for auxiliary alarms, which
don’t sound exterior sirens. If set to off, exterior sirens sound
instantly. If set to on, exterior sirens sound after a 15-second
delay.
To turn Exterior Siren Delay On/Off:
Once the item number has been entered, enter
1
for on (15-
second delay), or
0
for off (no delay). Press
ƒ
to apply the new
setting.
Summary of Contents for Advent
Page 56: ...54 Advent Commercial Fire System ...
Page 88: ...86 Advent Commercial Fire System ...
Page 110: ...108 Advent Commercial Fire System ...
