BEFORE YOU BEGIN
Read these instructions completely and
INSTALLER—Be sure to leave these
instructions with the Consumer.
IMPORTANT—Observe all governing
CONSUMER—Keep these instructions for
codes and ordinances.
future reference.
ELECTRICAL REQUIREMENTS
FOR PERSONAL SAFETY:
●
THIS APPLIANCE MUST BE PROPERLY
GROUNDED. See page 3.
●
DO
UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE
POWER CORD.
●
WE RECOMMEND THAT YOU DO
NOT USE AN EXTENSION CORD OR AN
ADAPTER PLUG WITH THIS
●
DO NOT CHANGE THE PLUG ON THE
POWER CORD OF THIS APPLIANCE.
●
FOLLOW NATIONAL ELECTRICAL
CODES OR LOCAL CODES AND
ORDINANCES.
15 AMP circuit
20 AMP circuit
15 AMP circuit
30 AMP circuit
“parallel” type
“perpendicular” type
“tandem” type
“tandem” type
●
If the electric supply provided does not meet the
above specifications,
a licensed electrician.
. Aluminum house wiring may pose special
problems—consult a qualified electrician.
●
This unit requires a separate circuit serving only
this appliance.
WINDOW REQUIREMENTS
●
Standard double-hung window with actual
opening width of
to
●
Clear vertical opening of
minimum from
bottom of sash to stool.
●
Install the air conditioner in a window where
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
46”
min.
Note:
All supporting parts should be
secured to firm wood, masonry or metal.
TOOLS NEEDED
●
Phillips screwdriver
●
Drill
●
Blade-type screwdriver
●
1/8” drill bit
●
Scissors or knife
●
Tape measure