GE 5489329 Technical Publication Download Page 222

Page: 222 / 247

Care and Maintenance

10-16

LOGIQ C9 Series – Basic Service Manual

5482298-100 English Rev. 5

Optional Diagnostic Checks

Optionally you can access the diagnostic software as described
in Chapter 5 or 7. View the error logs and run desired
diagnostics.

View the Log

1. Review the system error log for any problems.
2. Check the temperature log to see if there are any trends that

could cause problems in the future.

3. Check the Configuration Log; update if needed.

10. Power

and

System Status
Indicators

Check for proper operation of all Power and System Status Indicators.

11.

Battery

Where applicable, check that the battery is not damaged, does not leak,
does not emit an odor, and is not deformed or discolored. Observe all
warnings and cautions for battery handling, recharging, storing, and/or
disposal,

Table 10-10: Physical checks (Continued)

Step

Item

Description

Summary of Contents for 5489329
























































































































































































































































Search results

Summary of Contents for 5489329

Reviews:

Related manuals for 5489329

Brands by name

Popular brands

GE 5489329, Technical Publication

Search results

Summary of Contents for 5489329

Reviews:

Related manuals for 5489329

Brands by name

Popular brands