Chapter A7: Set Preferences
Definium AMX 700 X-Ray System
5161515-1EN
Rev. 6 (10 February 2008)
A7-18
Operator Manual
© 2008 General Electric Company. All rights reserved.
Image Management
Image Management preferences allow you to enable and configure the Copy Exam, Auto Tag, Auto Print,
Auto Push, and Auto Delete functions.
Figure A7-13
Preferences – Image Management
Copy Exam
Enabling the Copy Exam function allows exams to be copied between the local databases and network
hosts. It also allows exams to be copied to a CD.
There is no configuration for this function; it is either enabled (ON) or disabled (OFF).
Follow this process to enable or disable Copy Exam:
1. From the Worklist screen, press [UTILITIES].
2. Select
Preferences > Image Management
.
3. Press Copy Exam [ON] to enable the function.
Copy Exam [OFF] disables the function.
4. Press [CLOSE].
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).