GE 37 400, Technical Reference And Operating Manual

Page: 67 / 306

Important default settings 4 Principles of operation
USM 36 Issue 2 (12/2013) 4-15
Date format, Date, and Time
The date is saved together with the inspection results.
You can set the date format, the date, and the time us-
ing the corresponding functions of the function group
CONFIG1 on the second operating level.
ATTENTION
Always ensure that you are using the correct
date and time for documentation purposes.
Remember to adjust accordingly for Daylight
Savings.
– Switch to the second operating level.
– In the function group CONFIG1 , select the function
DATE FORMAT .
– Select the required date format. The time format is
changed together with the date format.
– Select the function DATE .
– Use the arrow keys Right and Left to change be-
tween day, month, and year.
– Change the setting by means of the arrow keys Up
and Down .
– Select the function TIME .
– Change the time in the same way as you did previ-
ously for the date. The new values apply immediately.