B
ELT
C
LIP
I
NSTALLATION
AND
R
EMOVAL
•
To install the belt clip, line up the
grooves on the clip with the grooves on
the back of the unit. Push downward
until it snaps into place.
•
To remove the belt clip, release the
snap with your finger or a tool while
firmly pushing the clip upward.
U
SING
Y
OUR
F
AMILY
R
ADIO
1. Turn on power.
2. Check the battery condition on the display.
3. Set to desired channel.
4. Adjust volume to comfortable level.
T
O
T
RANSMIT
Press the PTT (PUSH-TO-TALK) button.
Speak slowly and clearly 2-3 inches from
the microphone. To avoid cutting off the
first part of your transmission, pause
slightly after pressing the PTT button
before you start talking. The transmit icon
displays while the unit transmits.
T
O
R
ECEIVE
When you are finished talking, release the
PTT (PUSH-TO-TALK) button to listen to
the incoming transmission.
T
RANSMITTING
A
C
ALL
A
LERT
T
ONE
Press the PAGE button to initiate an Alert
tone transmission. The Alert tone will
automatically be transmitted for a fixed
length of time.
C
HANGING
C
HANNELS
Press the CHANNEL
or
buttons to
change channels. The channel may only be
changed during receive mode and cannot
be changed during Call Alert or PTT
transmit mode.
14-Channel Family
Radio System
User's Guide
We bring good things to life.
35809
Model 35809
15845800 (Rev. 4 E/F)
02-24
Printed in China
D
ISPLAY
1. Battery icon — Indicates the battery level. When the
batteries are nearly drained, the icon will start to blink
and the unit beeps periodically.
2. RX icon — Indicates when the unit is receiving a
transmission.
3. TX icon — Indicates when the unit is transmitting.
4. Channel number — Shows the current channel (1-14).
5. CALL icon — Indicates when the unit is paging.
B
UTTONS
AND
C
ONTROLS
A
DJUSTING
K
EYPAD
B
EEPS
Your radio emits a beep each time while
the buttons are pressed. To turn this sound
OFF, press PAGE while turning the radio
on. To turn this sound ON again, press
PAGE while turning the radio on.
D
ISPLAY
B
ACKLIGHT
The display automatically lights up with
any key press. The LCD display illuminates
for 12 seconds before turning off.
A
UTO
S
QUELCH
Your radio is equipped with an automatic
squelch system which automatically
shuts off weak transmissions and
unwanted noise due to terrain conditions
and range limitations.
A
UTOMATIC
P
OWER
S
AVE
Your radio has a unique circuit designed to
dramatically extend the life of the
batteries. If there is no transmission within
5 seconds, your radio switches to the
power save mode. The radio still receives
transmissions in this mode.
F
REQUENCIES
Ch. No
Frequency MHZ
1
462.5625
2
462.5875
3462.6125
4
462.6375
5
462.6625
6
462.6875
7
462.7125
8
467.5625
9
467.5875
10
467.6125
11
467.6375
12
467.6625
13467.6875
14
467.7125
I
MPORTANT
B
ATTERY
I
NFORMATION
•
Alkaline batteries are recommended for
longer play. Carbon-zinc or nickel
cadmium rechargeable batteries can
substantially reduce play time.
•
If you’re not going to use your radio for
a month or more, be sure to remove
batteries because they can leak and
damage the unit.
•
Dispose of batteries in the proper
manner, according to federal, state, and
local regulations.
•
Any battery may leak electrolyte if
mixed with a different battery type, if
inserted incorrectly, if all batteries are
not replaced at the same time, if
disposed of in fire, or if an attempt is
made to charge a battery not intended
to be recharged.
•
Discard leaky batteries immediately.
Leaking batteries can cause skin burns
or other personal injury.
I
NTERFERENCE
I
NFORMATION
This equipment generates and uses radio
frequency energy which may interfere with
residential radio and television reception if
not properly installed and used in
accordance with instructions contained in
this manual. Reasonable protection against
such interference is ensured, although
there is no guarantee this will not occur in
a given installation. If interference is
suspected and verified by switching this
equipment on and off, the user is
encouraged to try to correct the
interference by one or more of the
following measures: Reorient the radio/
television receiver’s antenna, relocate the
equipment with respect to the receiver,
plug the equipment and receiver into
separate circuit outlets. The user may also
wish to consult a qualified radio/television
technician for additional suggestions. This
equipment has been fully tested and
complies with all limits for Class B
computing devices pursuant to part 15 FCC
Rules and Regulations. This device
complies with RSS-210 of Industry Canada.
Operation is subject to the following two
conditions: (1) This device may not cause
interference, and (2) This device must
accept any interference, including
interference that may cause undesired
operation of the device.
S
ERVICE
ATLINKS Communications Canada, Inc.,
warrants to the purchaser or gift recipient
that if any manufacturing defect becomes
apparent in this product within 1 year
from the original date of purchase, it will
be replaced free of charge, including
return transportation.
This warranty does not include damage to
the product resulting from accidents, misuse
or leaking batteries.
Should your product not perform
properly during the warranty period,
either:
1. Return it to the selling dealer with
proof of purchase for replacement,
OR
2. Remove the batteries (where
applicable), and pack product complete
with accessories in the original carton
(or equivalent).
— Mail prepaid (with proof of purchase)
and insured to:
1. ON/OFF/VOLUME - Turn
counterclockwise to power ON and
increase listening volume. Rotate
clockwise to decrease volume and turn
power OFF.
2. PTT (Push to Talk) - press to transmit,
release to receive.
3. PAGE - Press to send a call tone to
other radios tuned to the same channel.
4. CHANNEL
- Press to change the
channel to the next higher frequency. If
the current frequency is at 14 (the highest)
the channel will change to 1 when the
CHANNEL
button is pressed.
5. CHANNEL
- Press to change the
channel to the next lower frequency. If
current frequency is at 1 (the lowest),
the channel will turn to 14 after
pressing the CHANNEL
.
6. MIC - Built-in microphone
7.
Speaker - Built-in speaker
8. Antenna
B
ATTERY
I
NSTALLATION
Your radio uses three AA alkaline batteries for power. To install
the batteries:
1. Remove the battery compartment door by sliding it down
from the unit.
2. Install 3 AA-size alkaline batteries (not included) into the
battery compartment. Make sure to follow the + and - symbols
in the compartment. Installing the batteries incorrectly may
prevent the unit from operating or can damage the unit.
CAUTION:
To reduce the risk of fire or personal injury, use
only the battery listed in the instruction book.
ATLINKS Communications Canada Inc.
(An Alcatel /Thomson Multimedia Joint Venture)
© 2002 ATLINKS Communications Canada, Inc.
Trademark(s) ® Registered
Marque(s) ® déposée(s)
ATLINKS Communications Canada, Inc.
c/o Thomson multimedia Ltd.
6200 Edwards Boulevard
Mississauga, Ontario
Canada L5T 2V7
The provisions of this written warranty are
in addition to and not a modification of or
subtraction from the statutory warranties
and other rights and remedies contained in
any applicable legislation, and to the
extent that any such provisions purport to
disclaim, exclude or limit any such
statutory warranties and other rights and
remedies, such provisions shall be deemed
to be amended to the extent necessary to
comply therewith.
If you are unable to find a qualified
servicer for out of warranty service, you
may write to:
ATLINKS Communications
Canada, Inc.
c/o Thomson multimedia Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-
0944
Attach your sales receipt to this booklet for
future reference. This information is
required if service is needed during the
warranty period.
PURCHASE DATE
_____________________________________________________________________
NAME OF STORE
_____________________________________________________________________
RX
TX
CALL
1
5
4
3
2
PAGE
CHANNEL
8
2
1
4
6
7
3
5
