16
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
•
IMPORTANT
—
Save these instructions
for local inspector’s use.
•
IMPORTANT
—
Observe all governing
codes and ordinances.
• Note to Installer –
Be sure to leave these
instructions with the Consumer.
• Note to Consumer –
Keep these instructions
for future reference.
• Skill level –
Installation of this appliance requires
basic mechanical skills.
• Completion time –
Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
•
Proper installation is the responsibility of
the installer.
•
Product failure due to improper installation is not
covered under the Warranty.
If the refrigerator has already been installed,
remove the base grille (see Step 2 in
Moving
the Refrigerator
), then skip to Step 5 in
Installing
the Refrigerator
.
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.GEAppliances.ca
Installation
Refrigerator
Instructions
Models 22, 23, 25, 26, 27 and 29
If the refrigerator has an icemaker, it will have
to be connected to a cold water line. A GE water
supply kit (containing tubing, shutoff valve,
fittings and instructions) is available at extra
cost from your dealer, by visiting our Website
at
GEAppliances.com
(in Canada at
www.GEAppliances.ca
) or from Parts and
Accessories, 800.626.2002 (in Canada
1.888.261.3055).
PREPARATION
WATER SUPPLY TO THE ICEMAKER
TOOLS YOU WILL NEED
Phillips-Head Screwdriver
3/8
″
and 5/16
″
Socket
1/2
″
and 7/16
″
Wrench
Plastic Putty Knife