GE 19200 Installation Instructions Manual Download

Page: 1 / 9

GE Model 19200

www.jascoproducts.com

Wireless Portable Chime

Installation Instructions for Wireless Portable
Door Chime Kit

Required Tools:

Small flat blade screwdriver, drill, drill bit, and phillips

screwdriver.

Included Hardware:

(2) 3x20mm screws
(2) Double sided adhesive pads

The portable wireless door chime Kit has two components:

Portable Chime (receiver) Push-Button (Transmitter).

How To Install The Batteries

1. On the bottom of the portable chime you will find a round battery release

tab. Push the tab inward and slide the cover in the direction of the arrow.

The battery cover will slide off.

Summary of Contents for 19200

Page 4: ...ode for the combination to operate together Note The push button has 3 additional jumpers that are used to set the chime tune that will play The chime tune jumpers do not affect the house security code 1 Remove power or batteries from the chime 2 To remove the batteries from the pushbutton open the pushbutton case as shown below ...

Page 6: ...r 1 Push buttons are typically mounted at the same height as the door knob or handle between 36 and 44 above the floor 2 Before mounting choose a mounting location that is not farther than 150 feet from the chime unit location ...

Page 7: ...inal position as possible and test operation If it works mount the button If it does not work see TROUBLESHOOTING 4 Use back cover of push button as a template to mark two screw holes 5 Drill two holes with 3 32 size drill in marked locations 6 Secure back cover to the mounting surface with two supplied mounting screws ...

Page 9: ... Company at 1 800 654 8483 or www jascoproducts com Made in China is a trademark of General Electric Company and is used under license to Jasco Products Company LLC 311 N W 122nd Street Oklahoma City OK 73114 www jascoproducts com Rev 1 07 19200 ...