DFR PS1
1
Safety Instructions
Please be familiar with all information in this manual prior to installation and
operation.
ALL ELECTRICAL INSTALLATIONS MUST MEET LOCAL AND NATIONAL WIRING
CODES AND SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
ENVIRONMENT
1.
Do not use this apparatus near water.
2.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
3.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
4.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (Including amplifiers) that produce heat.
5.
The building installation is considered as providing Short-circuit backup protection
6.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
7.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, shall be placed on the apparatus.
CONNECTION TO AC OUTLET
The power supply should be operated only from a standard outlet with proper
grounding connection.
CAUTION! PLUG REPLACEMENT SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
PLEASE ENSURE PROPER POLARITY OF THE CONNECTIONS.
Do not use extension cord unless absolutely necessary. If an extension cord must be
used, make sure the extension cord wire size should be MINIMUM 12AWG, 20A.
FUSE REPLACEMENT
Ensure properly rated fuse (250V, 4A) is used in each of the module and should be
replaced with authorized device.
DIS-ASSEMBLY AND REPAIR
Only use attachments/accessories specified by the manufacturer.
The power supply should be disassembled or repaired by a qualified technician.
Incorrect reassemble or repair may result in a risk of electric shock of fire which may
result in personal injury and property damage.
WEEE statement: Please do not throw electronic device
