GE Security Digia, Installation Manual

Page: 15 / 44

11
Record menu
The second submenu is the Record menu ( Figure 5 on page 12).
Navigate through the menu items by pressing the Up and Down
buttons. You can change the value of a menu item by pressing the
Left and Right buttons.
Table 5. Record menu options
Item Description
Resolution Set resolution to either full or quad.
Channel Select the channel to apply the following settings
to.
Frame rate Set the frame rate for the specified channel. The
sum of the frame rates from each channel cannot
exceed maximum frame rates for quad (120 fps
for NTSC, 100 fps for PAL) or full (30 fps for NTSC,
25 fps for PAL).
Quality Select the recording quality for the channel from
normal, high, or super.
Recording Assign the method of recording for each channel.
Choose from disable, continuous, by motion, by
sensor, or by schedule.
Motion zone Select full zone or partial zone.
Motion sensitivity Set the motion sensitivity for the specified
channel.
Sensor type Set the type of sensor for the specified channel
from none, N/O (normally open), and N/C
(normally closed)).
Pre record Enable or disable preevent recording. The default
time is 5 seconds.