GE Medical Systems marquette Dash 2000, Service Manual, Page: 17 / 202

INTRODUCTION: Safety Information
Revision A DASH 2000 Patient Monitor 1-5
2000 412-001
Safety Information
Responsibility of the
Manufacturer Marquette Medical Systems is responsible for the effects of safety,
reliability, and performance only if:
¥ Assembly operations, extensions, readjustments, modifications, or
repairs are carried out by persons authorized by Marquette.
¥ The electrical installation of the relevant room complies with the
requirements of the appropriate regulations.
¥ The equipment is used in accordance with the instructions for use.
Intended Use
This device is intended for use under the direct supervision of a licensed
health care practitioner.
To ensure patient safety, use only parts and accessories manufactured or
recommended by Marquette Medical Systems.
Contact Marquette Medical Systems for information before connecting
any devices to this equipment that are not recommended in this manual.
Equipment Symbols The following symbols appear on the equipment.
NOTE
Some symbols may not appear on all equipment.
ATTENTION: Consult accompanying documents before using the
equipment.
In Europe, this symbol means dangerous or high voltage. In the United
States, this symbol represents the caution notice below:
CAUTION
To reduce the risk of electric shock, do not remove the
cover (or back). Refer servicing to qualified personnel.
Defibrillator-proof type CF equipment; type CF equipment is specifically
designed for applications where a conductive connection directly to the
heart is established. The paddles indicate the equipment is defibrillator
proof.
Defibrillator-proof type BF equipment; type BF equipment is suitable for
intentional external and internal application to the patient, excluding
direct cardiac application. Type BF equipment is type B equipment with
an F-type isolated (floating) part. The paddles indicate the equipment is
defibrillator proof.