CyberScout User Manual
Installing the CyberScout
1038864A / December 2002
21
2.5
INSTALLING THE PAN
/
TILT ASSEMBLY
CAUTION:
Complete all installation steps before supplying power to the unit.
2.5.1 F
LUSH
-M
OUNT
A
DAPTER
See Figure 20 and perform the following:
1)
Plug the RJ45
interconnect cable into
the top of the pan/tilt
assembly.
2)
Carefully place the
interface module and
its connected cabling
into the flush-mount
adapter while raising
the pan/tilt assembly.
3)
Place the pan/tilt
assembly in the flush-
mount adapter and
secure it with three
machine screws
(provided).
Note:
Ensure that the
orientation marks (
) that
are located on the pan/tilt
raceway are facing toward
the center of the desired
pan arc.
Figure 20. Securing the pan/tilt assembly
