GE HEALTHCARE MAC 5500 Operator'S Manual Download Page 102

Page: 102 / 188

Using an SD Card

Restoring Files from the SD Card

After files have been copied to an SD card, you can use the

Restore All

function to

copy files from the SD card to internal storage.

NOTE:

CT Data Guard

is enabled and its

Prevent deleting of untransmitted records

field is set to

Yes

, you will receive the following warning if any of the records in

internal storage have not been transmitted:

The operation deletes existing records. This cannot be done since there are
untransmitted records!

If you receive this message, make sure that all records have been transmitted and try

Restore All

again.

Insert an SD card with ECGs into the system's card slot.

Refer to

“Inserting and Ejecting the SD Card” on page 100

Select

File Manager

to open the list of stored ECGs.

Select

Restore All

The following message is displayed:

Existing records (if any) in memory will be deleted. Continue?

Do one of the following:

• To cancel the copy, select

• To continue copying the files, select

Yes

The following message is displayed:

Deleting existing records (if any) in memory.... Please wait.

An indicator shows the progress/completion of the copying procedure.

Saving Files in XML Format

In addition to transmitting ECG records as XML files to a PC (see

“Transmitting ECGs in

XML Format” on page 86

), the MAC system can save ECG records as XML files on an

SD card.

NOTE:

Only ECGs recorded at 500 Hz or 500 Hz DVS can be saved in XML format. ECGs
recorded at 250 Hz cannot be saved in XML format.

Insert an SD card into the system's card slot.

Refer to

“Inserting and Ejecting the SD Card” on page 100

Select

File Manager

to open the list of stored ECGs.

Highlight the record(s) to export as XML.

Select

Save XML

The ECGs are converted to XML and saved to the SD card.

102

MAC

5500/MAC

5500 HD

2046275-016B

Summary of Contents for MAC 5500





























































































































































































Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands

GE HEALTHCARE MAC 5500, Operator'S Manual

Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands