GE HEALTHCARE MAC 2000 Operator'S Manual Download Page 50

Page: 50 / 226

Setting Up the Equipment

This system is compatible with MUSE v7.1.1, v8.0.1, and v9.0.0 and with CardioSoft/CS
v6.51, v6.61, v6.71 and v6.73.

Inserting the Paper

Before you can print ECG reports, complete the following steps:

Make sure the system is set up for the correct paper size.

This device can print on the following papers: A4, standard letter (8.5 x 11
inches), or modified letter (8.433 x 11 inches).

For information on adjusting the printer for the paper size, see

“Adjusting the

Tray for Paper Size” on page 177

Insert the appropriately sized paper.

Turning on the System

Press the power button to turn on the system.

Verify the system welcome screen is displayed with no errors.

NOTE:

If you encounter any problems powering on the system, see

“System Does

Not Power Up” on page 184

for further troubleshooting instructions.

Configuring the Device

When the device is ready for operation, configure the system settings using the
information in

“System Configuration” on page 113

If you are applying the same settings to multiple devices at the site, export the settings
to an SD card and use that card to import the settings to other systems.

Testing the Device

After you have set up and configured the device, test the device completely before
using it with patients. Use the following test scenarios:

• Conducting and printing a resting ECG

See

“Recording a Resting ECG” on page 69

for instructions.

• Conducting and printing an arrhythmia ECG

See

“Arrhythmia Mode Recording” on page 83

for instructions.

• Conducting and printing a stress ECG.

See

“Stress Testing” on page 95

for instructions.

• Saving, importing, printing, deleting, transmitting, and exporting records.

See

“Managing Internal Storage” on page 105

for instructions.

MAC™ 2000

2053535-002K

Summary of Contents for MAC 2000


































































































































































































































Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands

GE HEALTHCARE MAC 2000, Operator'S Manual

Search results

Summary of Contents for MAC 2000

Reviews:

Related manuals for MAC 2000

Brands by name

Popular brands