GE HEALTHCARE E-PSMP, Technical Manual

Page: 596 / 622

Module Frames and Modules
16 - 32
2062973-004
5 Troubleshooting
The problems and solutions in this section represent only a few of the faults that you may
encounter and are not intended to cover every possible problem that may occur.
5.1 Before you begin
CAUTION Make sure the patient is disconnected from the monitor before you begin
troubleshooting the device.
Before beginning any detailed troubleshooting, complete a thorough visual inspection to be
sure
•
All I/O cable connections are secured
•
All patient devices are properly powered
5.2 Device information and diagnostics
From the patient monitor, navigate to Webmin in the local browser as follows:
1.
Select Monitor Setup then Service . The local browser opens and displays the Webmin
login dialog box.
2. Type the username and password and click login or press Enter on the keyboard.
•
Username: biomed
•
Password: Change <space> Me
NOTE: Username and password are case sensitive. Username and password cannot be
created, edited or deleted.
The Webmin tool opens and defaults to the
Information tab.
5.2.1 Device information
1. On the Information tab, select Device Information .
The following sections display when the PDM is connected:
•
Acquisition Information - PDM - software part number, active software version,
main board revision, DAS board revision, serial number, asset number, MAC address,
IP address, power frequency, ECG filter.
•
PDM License Information - license option, status number of license.
5.2.2 Diagnostics
Messages and errors in log files provide useful information to a trained technician.
1.
Select the Diagnostics tab.
2. Select View Logfiles > PDM Log to view or Download Logs > PDM to download the log
file.
NOTE: You can only download log files when you are logged onto Webmin remotely.