GE HEALTHCARE E-PSMP, Technical Manual

Page: 54 / 622

Module Frames and Modules
2 - 40
2062973-004
To view a log file in Webmin:
1.
Log on to the Webmin application.
2. Select the Diagnostics tab.
3. Select View Logs .
4. Select one of the log files for viewing.
To download a log file to an external media:
1.
Log on to the Webmin application.
2. Select the Diagnostics tab.
3. Select Download Logs.
4. Select one of the log files for downloading.
NOTE: Depending on the CARESCAPE Monitor type, the log file downloading may be enabled
only through remote Webmin access with a service laptop.
5.4 Messages
5.4.1 ECG
The messages below appear in the ECG parameter window (PW), ECG waveform field (WF) or
the message field (MF).
Message Location Possible causes Possible solutions
Remove one ECG module MF More than one ECG
measurement module is
connected to the monitor at the
same time. Ensure that only one ECG
measurement module is
connected to the monitor at a
time. Disconnect additional ECG
measurement modules from the
monitor.
ECG module error MF ECG module recognizes an
internal communication
problem. Disconnect and reconnect the
module.
Replace the ECG measurement
module, if repeated.
ECG measurements
removed MF ECG measurement module is
disconnected. Reconnect the ECG
measurement module.
Faulty ECG cable MF, WF The ECG cable is defective. The
cable may be electrically
damaged, or the connectors are
wet. Change the ECG cable and the
lead set.
Change the ECG module if the
module connector is wet.
Keep the connectors dry. Avoid
excessive use of liquids when
cleaning the cables and
connectors.