- 59 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
12. AUTOMATION SETUP
12.9. Automation setup for USL JSD devices
The SX-4000 supports automation for USL JSD-80 and JSD-100 sound processor. Follow the
steps below to configure a USL JSD device in the server automation interface.
1. Click
[Add]
under
[Devices]
and enter the name of the device. In this case, it is
[JSD].
Set the device type to
[USL-JSD]
(see Figure 55).
2. Click
[OK]
and set up the device parameters for the USL JSD device.
Figure 55 USL JSD automation device setup.
3. Enter the IP address of the USL JSD device (see Figure 56).
4. Select the correct model (JSD-80 or JSD-100) of the device the server is connected to.
2
1
