GDC Standalone IMB SX-4000 Page 31 User Manual Download

Page: 31 / 176

2. SMS

September 26, 2016

SX-4000 Standalone

Integrated Media Block™

User Manual

- 31 -

2.3.4.5. Closed Captions

Figure 15 Closed Captions

[Rear Window Caption

Device]

Enable and configures a Rear Window display for closed captions.

Note: A USB-to-Serial converter is required for Rear Window display.

[Enable Device]

[Maximum waiting time]

Enable communication with a closed caption device that supports
SMPTE 430-10 (USL CCE-100, etc).

Specifies the maximum time to wait for the closed caption device to
report it is ready, before starting playback.

Summary of Contents for Standalone IMB SX-4000

















































































































































































Search results

Summary of Contents for Standalone IMB SX-4000

Reviews:

Related manuals for Standalone IMB SX-4000

Brands by name

Popular brands

GDC Standalone IMB SX-4000, User Manual

Search results

Summary of Contents for Standalone IMB SX-4000

Reviews:

Related manuals for Standalone IMB SX-4000

Brands by name

Popular brands