RemoteAccess-CPU series ·
17
English
Initial configuration of the network set-
tings
By default, the following settings of the
Network
interface are preselected:
Basic requirement for connecting to a virtual machine and
directly
accessing the web
application of the target module is the configuration of the device’s network settings.
Configuration via web application of the matrix switch
After you have successfully integrated the target module into a KVM matrix system,
you can change the network settings in the web application of the matrix system via
Configuration > Matrix systems > [Name] > Remote gateways
.
More information on this topic is provided in the web application manual of the
matrix switch.
Configuration via direct connection
If you want to establish the network connection before integrating the target module
into the KVM matrix system, you can do this via the target module's web applica-
tion.
Establishing a connection to the network interface
How to connect a computer to the network interface of the target module:
1. Use a category 5e (or better) twisted pair cable to connect the network interface
of any computer to the target module’s
Network
interface.
IP address of the
Network
interface:
Obtain address via
DHCP
(Fallback: IP address:192.168.0.1)
global network settings:
Obtain settings via
DHCP
B
Configuration
