DU-AG-0019-07 Rev A 10/26/05 GCX Corp Page 1 of 5
GCX Mounting Assembly Installation Guide
Philips MP90 (M8010A) Mounting Kit for Drager Zeus
The purpose of this guide is to:
1. Describe attachment of Down Post to Arm.
2. Describe attachment of Arm to 38mm Post.
3. Describe mounting of FMS.
4. Describe attachment of Zeus Channel Kit.
5. Describe attachment of CPU Flush Mount.
6. Describe operation/adjustment of M-Series Arm.
Parts Reference
The parts list below includes parts and hardware that will be used in this installation procedure.
Tools Required:
Phillips screwdriver, 5/32'' and 1/8'' hex keys (provided).
Attaching Down Post to Arm
Fasten 3.5'' Down Post to bottom of M-Series Arm in accordance with separate GCX Mounting Assembly Installation
Guide titled:
M and VHM Series Down Post Kit (DU-WMM-0006-01).
Mounting M-Series Arm on 38mm Post
1. Using the 5/32'' hex wrench provided, mount Arm on post by fastening Clamping Block to Arm with two (2) #10-32 x
7/8'' SHCS as shown below.
Item #
Description
Qty
1
M-Series Articulating Arm Assembly with 38mm Clamps
1
2
#10-32 x 7/8” SHCS
2
3 3.5''
Down
Post
1
4
#10-32 x 3/8'' Socket Head Cap Screw
3
5
Zeus Vertical Channel Kit
3
6
M6 x 16mm SHCS
4
7
CPU Flush Mount Pan
1
8
M3 x 8mm PHMS
4
9 M3
Flat
washers
4
10
CPU Spill Shield
1
11
#8-32 x 5/16” PHMS
2
12 Molded
Slide
2
13
#8-32 x 5/8” PHMS
8
14 5/32''
Hex
Key
1
15 1/8''
Hex
Key
1
