GCC Technologies StellarMark C Series, User Manual

Page: 93 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
89
Keeping your StellarMark CIIP Series clean and well maintained will ensure quality
output, consistent reliability, and extended product life.
Smoke, dust or residue build-up inside the laser system or the mechanical
components can cause a reduction in the laser power, reduced product life cycle, and
a host of other avoidable problems.
This section will cover how to perform regular maintenance on the StellarMark CIIP
Series
’s scan lens.
⚫
Electrical shock may occur if you do not turn off and unplug the laser
marker before cleaning.
⚫
Damage may occur to the system if you do not turn off and unplug the
laser marker before cleaning.
⚫
Always turn off and unplug the laser marker before cleaning!
10.1 Regular spot check
Before each use, inspect the machine, the power and connector cables, and
the working environment.
Look for frays in cables, proper connections, and any abnormalities that could
have an effect on marking performance and/or user safety.
Be sure that the StellarMark
TM
is properly secured and mounted.
If a problem ever arises with the G-Mark Basic / G-Mark Library
TM
software or
the StellarMark
TM
marking machine, be sure to notify your distributor as soon
as possible.
WARNING