GCC Technologies StellarMark C Series, User Manual

Page: 90 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
86
DUTY CYCLE
LASER WORKING
DELAY
START
→
X
0.1 m sec < X < 50 m sec
RESTART \ STOP
Definitions:
9.3 Laser Reaction Timing Diagram
◆
Start
→
Fire delaying time
It will take about 0.1m sec <X< 50m sec to fire after receive the command of
“Start”
A Power on
B
Time consuming between the “reading file” to the next step of
“Ready to fire” will be depend on the size of working object.
C~D After the file reading is completed, it will take less than < 1 µ sec
for the external device to receive a “Ready” signal from the
laser marker
E It will take between 0.1m sec ~ 50m sec for laser to trigger the
f
ire after receive the command of “Start”
F Ready signal is OFF when laser is firing
G Job is completed
G~H it will take about less than < 1 µ sec for the external device to
receive a “Ready” signal from the laser marker
I G-Mark marking software is closed
J Power off