GCC Technologies StellarMark C Series, User Manual

Page: 37 / 99

StellarMark CIIS/CIIP Series User ’ s Manual
33
Step 4. Plug the software keypro to a USB connector of you PC or Laptop.
5.2 Powering Up the Machine
Step 1. Connect the male end of the power cord to a quality surge protector
and the connect the surge protector to a proerly grounded outlet.
Step 2. Do the same for the computer system
Step 3.
Connect the female end of the power cord into the machine’s power
cable inlet located on the left side of the control unit.
NOTE
The StellarMark CIIP Series as been designed to work with AC Auto
Switch 100 & 240 VAC, 50-60Hz
CAUTION
Make sure both the LaserPro StellarMark CIIP Seres and the computer are
turned off before connecting either to a power source.
The connection to the AC power source must be the last step.
Do not pull in or out the cable while the power is being turned on.
WARNING