GCC Technologies LFC, User Manual

Page: 68 / 75

LFC-D Workstation User Manual 65
7.2 Laser Working Flow Chart
Definitions:
A Power on
B Time consuming between the “reading file” to the next step of “Ready to fire” depends
on the size of working object.
C~D After the file reading is completed, it will take less than < 1µ sec. for the external device
to receive a “Ready” signal from the laser marker
E It will take between 0.1m sec. ~ 50m sec. for laser to trigger firing after receive the
command of “Start”
F Ready signal is OFF when laser is firing
G Job is completed
G~H it will take about less than < 1µ sec. for the external device to receive a “Ready” signal
from the laser marker
I G-Mark marking software is closed
J Power off