GCC Technologies LFC, User Manual

Page: 6 / 75

LFC-D Workstation User Manual 3
1.4 The Safety Interlock System
The LFC Series Workstation is equipped with a safety interlock system utilizing limit
switch sensors on the electronically controlled front door. The limit switch sensor will shut
the laser off when detecting front door open. Do not attempt to remove or modify these
limit switches or any other component of the safety interlock system. If any time, the front
door is open while the laser keeps firing, unplug the system IMMEDIATELY, and contact
GCC local representative for technical support and maintenance instructions.
1.5 Safety Label
According to CDRH standards, all fixed or removable covers that allow access to a laser
beam must have the appropriate laser warning labels attached to them. These warning
labels must be clearly visible to the operator prior to removing the cover. Additional labels
must be applied inside of the machine and be visible in the event the covers are removed.
A label clearly displaying the manufacturer’s name, date of manufacture, description of
product, model number, serial number, and compliance statement must be attached to the
outside of the machine.
In compliance with CDRH standards, the required warning labels are affixed at the time of
manufacture to the GCC LFC Series Workstation in the appropriate locations. These labels
⚫
DO NOT operate the laser system if any component of the safety system is
malfunctioning.
⚫
DO NOT attempt to remove or modify any component of the safety interlock
system.
WARNING