ORCA-I Operation Manual
Technical Information
GBC Pro-Tech 1997 October
6-1
6HFWLRQ
7HFKQLFDO ,QIRUPDWLRQ
6SHFLILFDWLRQV
Table 6-1.
ORCA-I Laminator Specifications
Characteristic
Specifications
Dimensions
(L x D x H)
75" x 37" x 56"
(1.91 x .94 x 1.42 m)
Weight
Uncrated: 1425 lbs (646 kg)
Crated :1775 lbs (805 kg)
Laminating Rolls
61" (155 cm) roll face with high
release surface, upper and lower
rolls internally heated
Laminating Opening
1.5" (3.8 cm) maximum opening
Laminating Material
Uses heat activated and
pressure-sensitive materials 0 -
55" (0 - 140 cm) wide on a 3"
(7.6 cm) ID core, 10" (25.4 cm)
maximum diameter
Laminating Speeds
0 to 14 fmp (o to 4.3 mpm) with
variable speed, reversible action,
start and stop controlled either
through the instrument panel or
with the footswitch
Encapsulating Features
Pull rolls and cooling fans for
uniform flat cooling
Safety Features
•
Photoelectric eyes prevent
laminating roll movement
when hands are in the nip
area
•
All electrical and moving
mechanical parts are
located in bolted cabinets
•
Two emergency stop
buttons and two emergency
kick cables
Options
•
Outfeed Slitters
•
Outfeed Table
Installation
Requirement
USA: 220-240 VAC, 50/60 Hz,
55A, single phase 3 wire.
Europe: 230/400 VAC, 3-N
phase, 50 Hz, 25A per phase.
Air: 2 cfm at 100 psi, minimum
(0.5 m
3
at 758 vPa)
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500