© GBC Pro - Tech August 1999
Page 6 - 108
F - 160 Operation and Maintenance Manual
Applications
Parameter Chart 6 - Decal and mount ( Mount )
T E M P E R A T U R E
GAP & PRESSURE
MOTOR DIRECTION & SPEED
T O P T E M P .
B O T . T E M P .
P R E S S U R E
G A P
S P E E D
F W D
R E V .
G O
G O
= Panel
SOLID
F L A S
H I N G
= Footswitch
PULL ROLL SETTINGS
N O T E S
N / A
1/4 Turn
1/2 Turn
3/4 Turn
P R E S S U R E
MATERIALS
U P P E R U N W I N D :
L O W E R U N W I N D :
S U B S T R A T E :
P R I N T S :
N / A
N / A
1 / 4 " F o a m C o r e
Decals
6 8
6 8
1/4
00.0
Decal will come from the previous chart and diagram application. Substrate can vary. GAP will be dependent
on the substrate thickness. Pressure will be determined by operator. Speed is not indicated in Footswitch
mode. Because the process is described from the front of the laminator, motor direction is FWD and the pull
rolls are not required for this application.
D O W N
U P
