© GBC Pro - Tech August 1999
Page 6 - 98
F - 160 Operation and Maintenance Manual
Applications
Parameter Chart 1 - Precoating substrates
T E M P E R A T U R E
GAP & PRESSURE
MOTOR DIRECTION & SPEED
T O P T E M P .
B O T . T E M P .
P R E S S U R E
G A P
S P E E D
F W D
R E V .
G O
G O
= Panel
SOLID
F L A S
H I N G
= Footswitch
PULL ROLL SETTINGS
N O T E S
N / A
1/4 Turn
1/2 Turn
3/4 Turn
P R E S S U R E
MATERIALS
U P P E R U N W I N D :
L O W E R U N W I N D :
S U B S T R A T E :
P R I N T S :
P r o M o u n t
N / A
1 / 4 " F o a m C o r e
N / A
6 8
6 8
1/4"
00.0
Pro Mount can be substituted with a similar product. Substrate can vary. GAP will be dependent on the
substrate thickness. Pressure will be determined by operator. Speed is not indicated in Footswitch mode.
Because the process is described from the front of the laminator, motor direction is FWD and the pull rolls are
not required for this application.
D O W N
U P
