Page 4 - 17
Installation
Explorer 107 Operation and Maintenance Manual
© GBC Pro - Tech December 1999
4.9 Lateral film adjustment
Perform each of the following steps for
the upper and lower unwind shaftswhile standing to the
left of the front operating position.
Illustrations are for the upper unwind. The lower
unwind is identical to the upper unwind withthe excemption
of the saddle for the lateral film adjustment assembly.
For a detailed explanation of the lateral film
adjustments, refer to Section 5.4 Lateral film
adjustment.
a) Be sure the large inner dial is turned fully
counterclockwise.
Inner dial
b) Rotate the small outer dial clockwise.
Outer dial
- The unwind shaft moves towards the right of the
laminator.
c) Rotate the small outer dial counterclockwise.
Outer dial
- The unwind shaft moves towards the left of the
laminator.