![background image](http://html1.mh-extra.com/html/gbc/advancedpunch-pro/advancedpunch-pro_service-manual_571164171.webp)
GBC AdvancedPunch Pro
08/20/2015
Repairs/Adjustments
4-83
REP 2.31 Chip Level Emitter Replacement
PARTS LIST ON PL 3.5
Use this procedure to remove and install the Chip Level Emitter
Assembly.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to entire printing system.
2. Disconnect the Power Cord.
3. Open the Front Door.
4. Remove the Chip Tray.
5. Locate the Chip Level Emitter on the Frame at the left (upstream) side
of the Chip Tray compartment.
6. Disconnect Cable 023N01327 at the Chip Level Emitter.
7. Remove the Screws (2) and the old Chip Level Emitter.
There will be Washers (4) between the Sensor and the sheet metal
Bracket.
8. Place the new Chip Level Emitter, and the Washers (4), in position
and tighten the Screws (2).
9. Connect Cable 7715485 at the Chip Level Emitter.
10. Put the Chip Tray in position and push the Chip Tray Assembly in
firmly until it latches.
11. Close the Front Door.
12. Connect the Power Cord.
13. Power ON the entire printing system.
REP 2.32 Chip Level Receiver Replacement
PARTS LIST ON PL 3.5
Use this procedure to remove and install the Chip Level Receiver
Assembly.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to entire printing system.
2. Disconnect the Power Cord.
3. Open the Front Door.
4. Remove the Chip Tray.
5. Locate the Chip Level Receiver on the Frame at the right
(downstream) side of the Chip Tray compartment.
6. Disconnect Cable 023N01327 at the Chip Level Receiver.
7. Remove the Screws (2) and the old Chip Level Receiver.
There will be Washers (4) between the Sensor and the sheet metal
Bracket.
8. Place the new Chip Level Receiver, and the Washers (4), in position
and tighten the Screws (2).
9. Connect Cable 7715485 at the Chip Level Receiver.
10. Install the Clear Cover.
11. Put the Chip Tray in position and push the Chip Tray Assembly in
firmly until it latches.
12. Close the Front Door.
13. Connect the Power Cord.
Power ON the entire printing system.
Chip Level Receiver
Cable 7715485
Screws (2)
Chip Level Emitter
Cable 7715485
Screws (2)
Summary of Contents for AdvancedPunch Pro
