02_340_001_AJ_BE(Rev 11/05/11)
(from French version : 02_340_000_AJ_BE (Rev 11/05/11)
Portable Inspectra Laser
©Copyright Gazomat
6/48
1 W
ARNINGS
1.1 R
EADING OBLIGATION
All users must imperatively read this manual for their own safety, the safety of those around
them and the safety of the device. Users are required to use the device as instructed by the
manufacturer in order to get the most out of the device and keep it protected from damage.
Gazomat shall not be liable if the device is used other than as instructed.
The manufacturer shall not be liable in the event of any abnormal use of the product or any
malicious tampering with the product.
1.2 I
NSPECTRA
L
ASER DEVICE VERSION
The Inspectra
Laser detector is marketed in three versions:
- 100% gas version without Atex certification, which is not to be used in explosive
atmospheres.
- 100% gas version with Atex certification, which may be used in explosive atmospheres.
- 10,000 ppm version without Atex certification, which is
not
to be used in explosive
atmospheres.
This manual informs the user of the conditions of use of each of the three versions of the
Inspectra
detector. The user is responsible for identifying the device version being used and
for following and implementing the corresponding safety measures. The user can identify the
type of device from the marking on the front of the device (see paragraph 3.1), showing if the
device is approved for use in areas with explosive atmospheres.
Never use the
INSPECTRA
portable
100% gas version and the
INSPECTRA
portable
10000 PPM VERSION
with no
marking in atmospheres that are or are suspected to be
hazardous. The device is not designed for use in explosive atmospheres.
