02_340_001_AJ_BE(Rev 11/05/11)
(from French version : 02_340_000_AJ_BE (Rev 11/05/11)
Portable Inspectra Laser
©Copyright Gazomat
18/48
1
The connector is used to rapidly connect the suction rod.
Just insert the end of the rod in the connector.
2
The suction rod is connected.
3
The end of the suction rod can only be released by
pressing the release button.
6.3 H
YDROPHOBIC FILTER HOUSING
The dust filter housing is located on the underside of the device and is accessible by
unscrewing a cap with a pin wrench. The filter is kept sealed by an o-ring seal on the cap.
The housing contains a hydrophobic dust filter and an o-ring seal placed between the bottom
of the housing and the filter.
Sealing cap of filter housing
Cap and hydrophobic dust filter
