02_340_001_AJ_BE(Rev 11/05/11)
(from French version : 02_340_000_AJ_BE (Rev 11/05/11)
Portable Inspectra Laser
©Copyright Gazomat
16/48
5.5 W
IRED COMMUNICATION PORT
(
OPTIONAL
)
The communication interface is used for calibration, data saving and data retrieval operations
in non-hazardous areas.
The communication interface is located under the device (see figure below).
Access to the communication port is protected by a cap, which may only be removed in non-
hazardous areas.
Important: the connector is foolproof and the cable connector must be brought correctly
before the communication port before it is plugged in gently. The connecting ring must then
be screwed in.
Communication port components
THE COMMUNICATION PORT MAY ONLY BE USED OUTSIDE ANY
POTENTIALLY EXPLOSIVE ATMOSPHERES (IN A NON-
HAZARDOUS AREA)
Communication port
Connector cable
Cap for the
communication port
de l’embase
CAUTION : do not use the
communication cable in
explosive atmospheres
